Yamaha R6 Forum: YZF-R6 Forums banner
1 - 8 of 8 Posts

·
My R6 ate me
Joined
·
774 Posts
Discussion Starter · #1 · (Edited)
any one no where i can get some headers for the 6? or "midpipe" ??? its a 08 modle i gotta bad ass werkes gp style slip on and wanna keep it and just get rid of the stock cat

p.s my bike is the 08 silver one not the blue one or the black one
 

Attachments

·
08 Yamaha R6
Joined
·
3,057 Posts
He is not taking orders right this minute, but this is just a stock header cut down mid pipe added, and coated black. I bought one, and then ended up selling it but it looked like it was nice. I just was going to get a full leo system.

http://www.mjsperformance.com/r60608raceheader.htm
 

·
My R6 ate me
Joined
·
774 Posts
Discussion Starter · #3 ·
is that the only one?
 

·
I stall my R6
Joined
·
148 Posts
He is not taking orders right this minute, but this is just a stock header cut down mid pipe added, and coated black. I bought one, and then ended up selling it but it looked like it was nice. I just was going to get a full leo system.

http://www.mjsperformance.com/r60608raceheader.htm
I want to get this done but have heard I am going to lose power. The sound is sweet just don't want to lose my low end power.
 

·
Redline.......White Light
Joined
·
751 Posts
I know i will get "flamed" for this or whatever you say but i just finished doing the 05 header mod, and yes i did lose low end power. I just bought a t-tuner...... and i actually have been getting better results. I have an 08 though, and the characteristics are somewhat different from yours. What i am going to get flamed about is YOU WILL LOSE LOW END POWER WITH MOST FULL SYSTEMS, look at the akra pipe, lose low and mid until 7k. I actually got the best "smooth" power output with bmc filter, pc3, and t-tuner WHILE RETAINING THE EXUP. I know everyone will think i am crazy, but as soon as i get the files i will post my results. EXUP on, only lost 1.2 HP at top end, but low end was so much better. Exup off, low end sucked nads and top was only 1.2 hp higher......if i lose 5 lbs in body wieght would make up for that. These were all done with as close of tunes as possible. Just FYI. Hope this helps some. Mid pipe mods are not as bad as everyone makes them out to be. BTW, i am going to get the 08 ti-force when available, and will let you know if it is better or worse. I am willing to take the $1100 hit for the truth.
 

·
My R6 ate me
Joined
·
774 Posts
Discussion Starter · #7 ·
yea i do have a 08 lol let me no how it goes when you get it
 

·
Its Only a 600?
Joined
·
319 Posts
I just got done putting on my Performance Fabrication Works Midpipe, PCIII and GYTR Exhuast. I noticed a little lost in low end around 4-5, but after that it wakes up. My mid range has is alot better, and the sound is awesome.
 
1 - 8 of 8 Posts
Top