Yamaha R6 Forum: YZF-R6 Forums banner
1 - 1 of 1 Posts

3,956 Posts
Discussion Starter · #1 ·
XT Lap Timers are a paddock favorite race bikes because they’re easy to use, reliable, and are truly an indispensable tool for any rider that’s serious about lowering lap times. Available from Riders Discount, the Ultra-Lap model is by far one of the most popular motorcycle lap timers on the market today having been used by everyone from the occasional trackday rider all the way up to AMA Pro racers and everywhere in between. If you want to get the most out of your time at the track and improve your riding, then you need an XT Ultra-Lap!

Accurate data is the key to being able to tell if any changes you’ve made to your riding or your bike helps or hinders your circuit times. With an XT Ultra-Lap, you’ll be able to quickly verify if your times are better each instance you cross the line as the Ultra-Lap’s LED indicator lamp will show red if you’re slower, or green if you’re faster – than you were on your previous lap. At the end of every session, the device displays your fastest lap, your average lap time and your slowest lap. For your convenience, the Ultra-Lap’s software automatically divides up each track session along with track name and ambient temperature. This allows you to reference data easily at the end of the day, the next time you go to the same track or any time you want to look back at your progress with a memory of up to approximately 2,000 laps stored on the XT’s internal chipset.

Shown here with the 2ft cord. Also available with a 6, 8, or 10ft cable.

To prevent forgetful riders from missing out on valuable data, as long as you turn it on before your first session of the day, the device will automatically power up each time you head out on track.

XT Racing products are not yet available on our website. To order yours, call Brad at 866.931.6644 ext 810. If you have any questions, send a note to FORUM at RIDERSDISCOUNT dot COM and we’ll get back to you right away.

We also have XT Racing IR Beacons available. It’s never a bad idea to have your own beacon, just in case no one else shows up at the track with one. If you want to get really clever, it’s possible to configure your lap timer to measure section split times between the start/finish line on the racetrack with the use of additional beacons. The IR transmitter can be powered by either 4 AA batteries mounted internally or with an external 12V power source.

Also ask about adding the fork clamp mount for an easy mount location.
1 - 1 of 1 Posts