Yamaha R6 Forum: YZF-R6 Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
20 Posts
Discussion Starter · #1 ·
Hi all
Bike: 2010 R6 RJ15 trackbike
The bike has crashed and I'm rebuilding it. But now it doesn't want to start.

Electronics: YEC ECU and wiring loom

I checked the wiring loom for damage. But there was nothing to see.

it is possible to turn the bike on. Dash etc is all working. No error codes on the right side of the dashboard
The left side displays: 28. If I push the reset button it says A28. Or A and C.
Don't know what this is?

When the I press the starter, you can hear the starter motor running. But it doesn't fire on.

Fuses are all checked.

 
1 - 4 of 4 Posts
Top