Yamaha R6 Forum: YZF-R6 Forums banner

R6 -06 doesn't start, 5vk-81950-40 clicking

1 reading
11K views 2 replies 2 participants last post by  hector113  
#1 ·
So my bike doesn't start:

First it drained the battery, so I thought it had gone bad after standing for 3 months. I got a new one and it worked fine. Drove like 30 min and it just died.

Jump started and it worked until we disconnected jump cables.

Tried to start with the old battery and the new lithium one. They read 14v & 13v. But at first I got err 1, and the 5VK-81950-40 relay just keeps clicking continuously.

Replaced the rectifier already and didn't change anything. Have a new stator but not bothered to install yet since the relay keeps clicking.

Can the relay be bad or both my batteries?

When I jump started a few days ago, with the new lithium battery installed that I think drained, I think the relay clicked like this.. Thought it was the rectifier.

Any suggestions?

Should the relay click like this?


Sent from Motorcycle.com App