Yamaha R6 Forum: YZF-R6 Forums banner
Cancel
Create thread New Forums

2008 R6 Code 20

Tags
code 20
Jump to Latest
2.3K views 2 replies 3 participants last post by  Intuit  
C
#1 ·
Hello all,

I bought a used 2008 R6 with 20k miles in it. Everything was going well but during the recent winter season I started the bike and it was rather cold then suddenly the check engine light appeared with a code 20. I let the bike warm up and get to around 170 before turning of then on. Suddenly the code went away and had no issues after driving. Then today again on a cold start the check engine light came back and at idle it was a little bouncy but during regular drives it was perfect. Turned it off and on then the code and check engine light disappeared. Check engine light stays off so long as engine is warm. Any fixes or solutions to this problem?
 
I
#3 ·
My '08 was a 2nd Gen while your '08 is a 3rd Gen. But here are my experiences with it... (nutshell: the vacuum line to the sensor was collapsing - even though it appeared perfectly fine) I replaced all vacuum lines. No more issues. (make sure you get true vacuum line and not windshield washer hose - not the same thing)
www.r6-forum.com

Code 20

before i started it yesterday it said code 20,then it didnt do it again until i stopped for a couple hours to visit with some people,now today i tun the key on and here we are again,its my 2008 with 10,000 on the clock,i dont get it,i bought a new bike so i wouldnt have this shit happening,any...
www.r6-forum.com www.r6-forum.com

.
 
Save
Reply Quote Like Like
Yamaha R6 Forum: YZF-R6 Forums
posts
3.1M
members
115K
Since
2003
A forum community dedicated to Yamaha R6 motorcycle owners and enthusiasts. Come join the discussion about performance, modifications, troubleshooting, maintenance, and more!
Full Forum Listing
Explore Our Forums
General R6 Discussions Appearance and Exterior Mods Garage / Mechanical Help Exhaust and fuel delivery New Member Introductions